Sony Srs Xb12 Pairing Two Speakers

By connecting two SRS-XB3 speakers via BLUETOOTH, you tin select audio reproduction between stereo way (stereo audio) and double way (monaural audio). To utilise this office, two SRS-XB3 speakers are required. Select from the post-obit two playback methods.

Double mode

Both speakers play the aforementioned sound. Double way is the initial setting.

Stereo manner

One speaker plays the audio on the right channel (right side), while the other speaker plays the sound on the left channel (left side) for stereo playback between the speakers.

Note

• Turn off both speakers before setting up the Speaker Add function.

1. Fix the showtime speaker.

   1. Printing the (power) button on one of the speakers to turn it on.

      The (power) indicator lights up in green.

      The (BLUETOOTH) indicator begins to flash in white.

      

   2. Press and hold the ADD button until the speaker releases a sound.

      The (BLUETOOTH) and L/R indicators wink in white. A beep will and so be heard when the L/R indicators lite upward while the (BLUETOOTH) indicator keeps flashing.

      

2. Ready up the second speaker.

   1. Press the (power) push button on the other speaker to plow it on.

      The (power) indicator lights up in green.

      The (BLUETOOTH) indicator of the speaker begins to flash in white.

      

   2. Press and hold the Add button until the speaker releases a audio.

      The (BLUETOOTH) and L/R indicators flash in white. The L/R indicators then light upward while the (BLUETOOTH) indicator turns off.

      

      Hint

      • If the 2 speakers quickly make a BLUETOOTH connection, the L/R indicators may lite up without the (BLUETOOTH) indicator and the Fifty/R indicators flashing.
      • Set the second speaker within 1 infinitesimal. If you exercise not ready it upwardly within 1 minute, the setting of the first speaker will be canceled.

3. Operate the speaker where the (BLUETOOTH) indicator is flashing to make a BLUETOOTH connexion with a BLUETOOTH device.

   When the (BLUETOOTH) indicator of the speaker stops flashing and lights upwards, the BLUETOOTH connection is established.

   

4. Start playback on the BLUETOOTH device, and accommodate the volume to moderate level.

5. Press the –/+ (book) buttons on one of the speakers to accommodate the volume.

   Book adjustment of 1 speaker is reflected on the other.

Hint

• When making or receiving a telephone call, simply operate the speaker where the (BLUETOOTH) indicator is lit.
• If a portable audio device, etc. is connected to the AUDIO IN jack, the speaker automatically switches to Sound IN mode, and the Speaker Add function is terminated.
• If any other BLUETOOTH device(s), such as a BLUETOOTH mouse or BLUETOOTH keyboard, is connected to the BLUETOOTH device that is connecting with the speaker, in that location may be distorted sound or noise in the speaker output. In this example, finish the BLUETOOTH connectedness between the BLUETOOTH device and other BLUETOOTH device(southward).
• To stop the Speaker Add function while in use, press and hold the Add push button until a beep is heard.
• When the speaker, that had been used equally the Speaker Add function the last time, is turned on, the speaker volition try to establish the Speaker Add function with the other speaker that had been continued. If you want to apply two SRS-XB3 speakers as the Speaker Add function again, plough the other speaker on within a minute, otherwise the speaker will terminate the automatic connection as the Speaker Add role.
• If you want to use the speaker that had been used as one of the speakers of the Speaker Add part by itself, press the (power) push button to turn on the speaker, then printing and concord the ADD button until a beep is heard to terminate the Speaker Add together function since the speaker tries to establish the last-made connection.
• When using the Speaker Add function, switch the codec to SBC.

Note

Source: https://helpguide.sony.net/speaker/srs-xb3/v1/en/contents/TP0001030926.html

Share this post